TitleProduct

for Wax/Acid Zlz High Speed Centrifugal Spray Congealing Granulator

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Jiangsu

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-22 16:29

  • Browse the number:

    297

Send an inquiries
+
Changzhou Jinqiao Spray Drying and Engineering Co., Ltd.
Contactaixin:

Mr. Leighton Ge(Mr.)  

Email:

telephone:

phone:

Arrea:

Jiangsu

Address:

Luhengroad, Xiyan Village, Hengshanqiao Town, Changzhou, Jiangsu, China 213119

Website:

http://www.medtech-corp.com/com/changzhoujinqiao/

+

Spray congealing of stearic acid, wax, fat and the other products which could be melted under not too high temperature.



 
ZLZ High Speed Centrifugal Spray Cooling Granulator (Congealing granulator)
 
Brief Indtroduction: 
I . Main advantages:
1. The completion of the market are very intensive these days. It is necessary to increase the processing capacity with plant. It is very difficult to increase the capacity with traditional design, while Centrifugal spray congealer could be very large, such as 20 tons per hour.
2. Powder and irregular flake materials are very hard to compete with the domestic and overseas suppliers. Regular pellets has the characteristics of lowest flying powder, good flowability and easy metering, well dispersion and easy dissolution, as well as stability, so the product is very competitive.
3. Centrifugal spray congealing technology is used to improve the operating conditions and environment, control the flying powder in the processes of granulation, transportion and packaging.
4. Compare to the traditional technology, centrifugal spray congealer has the advantages of large capacity, uniform pellets, high yield and convenient operation. 

II . Main shortage:
The investments on equipment and workshop are higher. 

III . Design:
The congealing process of melted material is generally divided into three stages: the first stage is pre-cooling process. The melted material is cooled from feeding temperature to melting point. The second stage is solidification, the melted material liquid will be solidified, and the temperature normally keeps almost the same in this period. The third stage is cooling and hardening of the solid material. The product will be cooled in this stage.
The time of the above three stages differs from each other according to the properties of different materials. In terms of the conversion process of the materials from liquid state to solid state inside the spray tower, we build a data model, which guides us to calculate the diameter of the tower body, so to choose the specification of the equipment. 

IV: Main Factors relating to congealing process: 
1. Material temperature: the material temperature influences the working capacity of the equipment. We normally consider the temperature between the melted material feeding temperature and melting point, or solidification temperature. The capacity is lower when the feeding temperature is higher. When the melted material temperature is too high (such as the temperature is more than 50 ° C higher than melting point or solidification temperature), it is suggest to cool the product before feeding, so to fully utilize the capacity of the equipment.
2. Property of the material. The solidification properties of different products are always different. The main properties that influences the congealing processes are melting point (or softening point), density, heat transfer factor, crystallization property, and viscosity (or surface tension) etc. The viscosity and surface tension mainly influence the quality of pellets, and others influence the cooling and solidifying speed, so to influence the capacity. Generally speaking, The higher melting point and density, the bigger heat transfer factor, the smaller latent heat, the bigger capacity, and vice versa.
 
Special Note: This kind machine has a extremely high collecting rate, almost no dust exhausted with the air. Some of our customers have produced hundreds tons of materials; the cyclone only collects less than 1kg fine powder. So there is need for one cyclone + bag filter. We normally suggest only one cyclone, or exhaust air directly from the drying tower. 

Customers that are interested, please contact us for further details. We can supply budget of the total investment, area occupied, utilies consumption based on each ton, and other relative information for customers to make decision.

 
Specification ZLZ-500 ZLZ-1000 ZLZ-2000 ZLZ-3000 ZLZ-5000 ZLZ-10000
Air Inlet Temp -20° C -20° C , Adjustable
Air Exhaust Temp 20-40° C(depend on the properties of the product, and URS)
Nominal Processing Capacity (Kg/h) 500  1000  2000  3000  5000  10000
Main Pellets Diameter Range (µm) 100-2000 100-2000 100-2000 100-2000 100-2000 100-2000
Cooling method Cooling dehumidifier
Cooling Tower Diameter (mm) 6500 8000  8500  9000  9500  10000
Overall Dimensions (m) According to the specification and plant layout
Collection rate 99-99.99%,depend on the properties of the product and configurations

other products