Lithium Iron Phosphate UPS

Size:

Battery Model:12V 75Ah

Nominal Capacity:75AH

Battery Size :260*169*215

Battery Weight : About 23.4kgs

Selling Point:

·Electric Vehicles, such as E-bike, E-scooters,golf car, small-scale electric flat car, forklift, cleanness car, electric wheelchairs

·Electric boats, such as trolling fishing boat

·Robots for industries and military

·Remote data transfer system

·Satellite communication station

·Un-manned aircrafts

·Power tools, such as drilling, cutting and polishing tools

·Power supplier for Training systems, such as Torpedo Trainer

Battery Model:12V 100Ah

Nominal Capacity:100AH

Battery Size :407*173*240

Battery Weight : About 25kgs

Warnings:

Do not put the battery in water, and keep the battery in a cool dry surrounding.

Do not use or leave the battery near a heat temperature(in fire or a heater)

Do not reverse the position and negative terminals.

Do not short-circuit the battery by directly connecting the positive and negative terminals with metal objects.

Do not transport or store the battery together with metal objects such as hairpins, necklaces, etc.

Do not directly solder the battery and pierce the battery with a nail or other sharp objects.

Must use Qualified charger,when you charging the battery must have people nearby.

Battery Model:12V 120Ah

Nominal Capacity:120AH

Battery Size :407*173*240

Battery Weight : About 31.5kgs

Safety Test:

Short Circuit Safety Test

Overcharge Safety Test

Crush Safety Test

No fire, No explosion

Needing Safety Test

Extrusion Safety Test

High Temperature Safety Test

Battery Model:12V 150Ah

Nominal Capacity:150AH

Battery Size :484*171*240

Battery Weight : About 34kgs

Installation, use and maintenance of lead-acid battery

1. Unpacking and inspection

It is forbidden to bear the force at the terminal to prevent the terminal damage and the crack of the sealing part;

Avoid battery inversion, falling or impact;

Absolutely avoid the use of wire rope and metal wire to prevent short circuit of battery.

2.Precautions before installation

The battery shall be placed in a low position as far as possible;

Avoid installing the battery near the heat source (such as transformer);

Since the battery may produce flammable gas during storage, avoid being close to the spark generating device during installation

Battery Model:12V 200Ah

Nominal Capacity:200AH

Battery Size :522*240*230

Battery Weight : About 47.5kgs

Installation, use and maintenance of lead-acid battery

1. Installation and wiring

First link the batteries, then link the battery pack with the charger load;

When multiple batteries are connected in parallel, the mode of series connection and parallel connection shall be followed;

In order to ensure better heat dissipation conditions, the spacing between grid batteries should be kept more than 20 mm;

2. Battery usage

In the process of transportation and storage, due to the loss of some capacity of self discharging battery, please make up the power before use;

If it is temporarily parked during use, please make up the power regularly.

Battery Model:12V 250Ah

Nominal Capacity:250AH

Battery Size :520*268*230

Battery Weight : About 69kgs

Service environment of lead-acid battery

1. The service temperature of lead-acid battery is relatively wide. The lowest temperature is about below - 60 ℃, the highest temperature is about 80 degrees above. That is to say, lead-acid batteries can be used in cold or hot areas all of them can be used. However, try to avoid extreme temperature. After all, the performance is still affected.

2. No fire nearby.

3. Never put the battery in a sealed environment,

The reason is to prevent the explosion.

http://www.zcscitech.com/