TitleProduct

Anti-Corrosion Steel Pipe for Fluid Transmission

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Hainan

  • Validity to:

    Long-term effective

  • Last update:

    2017-07-25 17:36

  • Browse the number:

    106

Send an inquiries
+
Hainan Huatong Xinda Trade Co., Ltd.
Contactaixin:

Ms. Lin(Mr.)  

Email:

telephone:

phone:

Arrea:

Hainan

Address:

Rm. 1601, Bldg 7, Zone B, Jinghua Cheng, Haikou, Hainan, China 570125

Website:

http://www.medtech-corp.com/com/pipefitting-htxd/

+

Specifications
 
Spiral Welded Anti Corrosion Steel Pipe: 
1.STANDARD:AIP5L,ASTM 
2.OD: 20MM-3200MM 
3.COATING THICKNESS: 50UM-400UM 

 Spiral Welded Anti Corrosion Steel Pipe:
It has the antiseptic property to be good,water-absorptivity low,mechanical strength higher performance. THhe outside three pe guard against corrosion.two or three polyethylene guards against corrosion the buried pipe line to use in the fluming water,the oil,the gas and so on lying,the operating temperature 50-70°C.
Standard API 5L
Grade PSL-1 API 5L - Gr.B/X42/X46/X52/X60/X70 etc.
( Material) PSL-2 ISO3183 - L245/L290/L320/L360/L415/L485 etc.
Minimum Order Quantity 1 Ton
Outside Diameter Ranges PSL-1 0.405-80(in) or 10.3mm-2032mm
PSL-2 4 1/2 -80(in) or 114.3mm-2032mm
Wall Thickness Ranges SCH10~SCH160 Or STD,XS,XXS Or 1.73mm~59.54mm
Length For 20Ft Container 4.8m-5.8m
(negotiable) For 40Ft Container 4.8m-12m
  Most common choice 6m, 12m
Type Welded ERW,LSAW/SSAW
Seamless Cold Drawn,Hot Finished,Hot Expanded
Cap (negotiable) Pipe size should under DN600
Pipe End Plain end All sizes
Bevel end Pipe size above DN50, and the thickness should greater than 3.2mm
Our advantages ·Diverse products(Steel pipes, pipe fittings, other fittings)
·Any third party inspection is accepted by we company.
·Quick response in quotation,delivery,after-service.
·Focus on pipe & tube solution for project application.

Coating Details
Nominal size of Pipe Minimum thickness of normal coating in mm
Up to DN100 1.8 
Over DN100 up to DN250 2.0 
Over DN250 to below DN500 2.2 
From DN500 to below DN800 2.5 
From DN800 3.0