TitleProduct

Ft14h Ft44h Lever Ball Float Type Steam Trap, Valve-Condensate Steam Trap From Competitive China Sup

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Hebei

  • Validity to:

    Long-term effective

  • Last update:

    2017-10-01 07:55

  • Browse the number:

    273

Send an inquiries
+
Hebei Xukang Meter Manufacturing Co., Ltd.
Contactaixin:

Ms. Jenny Zhao(Mr.)  

Email:

telephone:

phone:

Arrea:

Hebei

Address:

No. 7 Yinhai Road, Development Zone Of Wei County, Xingtai City, Hebei Province, China 300350

Website:

http://u-ideal.medtech-corp.com/

+

FT14 Lever ball float type steam trap
1) New type, better design; 2) Seal well; 3) Automatic 4) Energy-saving
 
1. Application
  1. Lever-float type stream traps are widely applied in industrial steam heating equipment, various large-scale heat exchanger and drying machines, jacketed boiler etc., especially for massive draining of condensed water places.
  2. Saving energy.
  3. Especially applicable for steam heat tracing pipe
 

 
2. Features of ball steam traps
  1. It used the new type valve structure (SCCV closure way) and has excellent sealing ability and durability (tianjin U-ideal Instrument Co., Ltd to sales@you-ideal.com).
  2. No noise before operating in favor of environmental protection.
  3. Balance double valve seat design. Small but the displacement is bigger than the common steam trap. Can display the superiority especially in the big displacement situation.
  4. Internal component is made of stainless steel, corrosion and cavitation erosion proof.
  5. Its interior installs bimetal elements automatic air release valve that can prevent the air block and the steam block.
  6. Good working even at temperature 0 ºC.


(Inverted Bucket Steam Trap
Bimetal Type Steam Trap 
Stainless Steel 304 Steam Trap
free ball float steam trap
Pilot-operated inverted-bucket steam trap
Thermostatic Steam Trap
casting ball float steam trap
double valve control lever ball float steam trap
Heating Motivated Plate Steam Trap
Automatic steam trap valve
Automatic steam trap valve
steam hydrophobic valve
overheat steam traps
Disc steam trap
metal expansion steam trap
Combined overheated sream trap
Hot-motive force steam trap
impulse steam trap
liquid expansion steam trap
impulse steam trap;impulse stein the morning trap;impulse stemorning trap
Inverted bucket overheat steam traps)
3. Working principle of steam trapsThis valve use double valve hole to reduce the pressure of core when opening and reach the great displacement, The float ball fluctuates along with the change of fluid level when working so that the lever open or close the seat.it has no steam leakage for the valve seat hole locates below the condensate water level and forms water sealing. The water and steam separately.
 
Standards: DIN, API, ANSI, BS, EN, GB and JIS etc.
 
4. Installation instruction1) The pipeline of the free-ball float steam trap must be cleaned before installation in order to get rid of the rubbish.
 
2) The trap should be horizontal installed, the pipeline before trap should toward a little downgrade of trap lest steam locked. The flow direction in the body should be same as the condensate water in the pipeline.
 
3) When installed, the valve should be approach to heat-supply equipment. The diameter of pipeline should larger than the nominal diameter of this valve.
 
4) This valve should be installed in the end and the lowest in the steam pipeline.
 
5) In the wholly device, each equipment install trap to drain condensate water separately lest bringing steam block and affect the heat up purpose,
 
6) If there has a long time to stop transfer steam .the sleeper in the trap body should be draped from the bore of bottom.
 7) For the front and back of trap should be installed with valve. It is better with gate valve so that using it when repairing the trap.
 
The parts material, flange and butt welding dimension may selected according to current operating condition or users' requirement to meeting the requirements of various engineering.
 
Model No. Nominal Diameter Connection working pressure temperature Shape sizes(mm)
(mm) DN (MPa) (ºC) l l1 h1 h2 w
ft14-16 15~20 thread 0.01~1.6 250 125 155 55 55 155
ft14-16 15~25 thread 0.01~1.6 250 190 220 120 80 140
ft44-16 15~20 0.1~1.6 195 255 8 155 110
(ft43) 25 flange 350 215
(ft46) 35~50 flange 0.01~1.6 350 230 345 175 110 190
65~80 270 420 218 125 220