TitleProduct

Standard Phantom Load Program-Controlled Single-Phase Standard Power Source

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Beijing

  • Validity to:

    Long-term effective

  • Last update:

    2017-07-25 23:05

  • Browse the number:

    137

Send an inquiries
+
Beijing GFUVE Electronics Co., Ltd.
Contactaixin:

Mr. Andy Huang(Mr.)  

Email:

telephone:

phone:

Arrea:

Beijing

Address:

Bldg,1-1006,Joy Mansion,No.99 Chaoyang North Road, Chaoyang District, Beijing, China 100025

Website:

http://www.medtech-corp.com/com/guangfuhui/

+

Application of Electrical testing and measurement device Program-Controlled Single-Phase Standard Power Source, with excellent working performance, CE. ISO9001: 2008. IEC approved

It is suitable for power department, measuring department, quality control department, research units, and institutions of higher learning, and electric energy meter, power distribution terminals, power supply management, load control, power quality, reactive power compensation device and production of the enterprise and so on. It can be as single phase voltage source, current source and power source.

Main Functions and Features
To set up and take the load regulation of voltage, current, phase and frequency of the power factor;
To be set to 2 ~ 128 times of the amplitude and phase harmonics, and it can be added to the base wave in every harmonic output;
Voltage, current output a wide range, big power, high stability, waveform distortion degree is very small;
To have strong with load ability, and take capacitive, sensibility, resistance of composite type load or load and load regulation is higher than 0.01%;
To apply the 32 bit MPU + DSP + FPGA, powerful flexible;
To use hardware PID, fast response, the change of load will not cause output volatility;
Industrial frequency waves as high as 50000 points a week of the wave kneading, signal output without filter, precise output waveform, the harmonic output precision, harmonic distortion degree is small;
Range switching automatically;
To use software calibration, simple operation, stable and reliable;
To have the big screen, 320 X 240 LCD display, Chinese or English interface, operating simplely;
To have perfect over-current, over-voltage, heat, a shorts-and-opens, overload protection, automatic failure detection;
With RS232 interface, and PC connection;
To take place machine software, it can be output through the PC software of program.

Technical Data
AC voltage output
Range: 57.7V / 100V / 220V / 380V / 750V, range switch automatically
Adjust fineness: 0.01% RG
Accuracy: RG is higher than 0.05%
Stability: Better than 0.01% RG / 1 min
Distortion degree: Better than 0.1% (not capacitive load)
Output power: The rated each phase is 40 VA
Full load regulation rate: Less than 0.01% RG
Full load regulation time: Less than 1mS
Temperature drift: 8 PPM /
Long-term stability: 60 PPM/year
AC current output
Range: 0.1/ 0.25A / 0.5A / 1A / 5A / 10A / 20A / 50A / 100A, range switch automatically
Adjust fineness: 0.01% RG
Accuracy: RG is higher than 0.05%
Stability: Better than 0.01% RG / 1 min
Distortion degree: Better than 0.1% (not capacitive load)
Output power: The rated each phase is 40 VA
Full load regulation rate: Less than 0.01% RG
Full load regulation time: Less than 1mS
Temperature drift: 8 PPM /
Long-term stability: 60 PPM/year
Phase angle
Adjusting range: 0 ~ 359.99°
Resolution: 0.01°
Accuracy: 0.03°
Frequency
Adjusting range: 40Hz ~ 65Hz
Resolution: 0.001 Hz
Accuracy: 0.002 Hz
Temperature drift: 0.5 PPM /
Long-term stability: 4 PPM/year
Work power
Single phase AC 220V± 15%, Frequency 50/60 Hz.
Volume and weight
Size: 420mmx320mmx155mm (LxW× H)
Weight: 12kg
Environmental conditions
Working temperature: 0 ~ 40
Relative humidity: ≤ 85%
Storage conditions: -30 ~ 60