TitleProduct

IEC60068-2-75 Calibration Device for Calibrating Ik01-Ik07 Spring Hammer

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Jiangxi

  • Validity to:

    Long-term effective

  • Last update:

    2017-08-08 12:22

  • Browse the number:

    228

Send an inquiries
+
Pego Group (HK) Co., Limited
Contactaixin:

Ms. Penny(Mr.)  

Email:

telephone:

phone:

Arrea:

Jiangxi

Address:

No. 233, Yangshan Road, Yuanzhou District, Yichun, Jiangxi, China 336000

Website:

http://www.medtech-corp.com/com/pegotester/

+

IEC60068-2-75 Spring Hammer Calibrator Device
 Introduction:
Spring hammer calibrator device is specially for lab to calibrate the spring hammer, it is designed according to IEC60065-2-75-1997, it is mainly apply to third part lab, the National immigration department and appliance-related research institutes.
 
Parameter:
Accuracy 0.01J
Repeatability ±0.01J
Impact energy range 0J ~2J
Guide groove diameter 51mm
Energy loss <0&period;002J
Trigger travel >30mm
Number of calibration weights 1

Relative Products&colon;
Spring impact hammer
Introduction&colon;
IK ratings are defined as IKXX&comma; XX is a number from 00 to 10 which indicates the degrees of protection provided by enclosures against external mechanical impacts&period; The different IK rating relate to the ability of an enclosure to resist impact energy levels measured in joules &lpar;J&rpar;&period; It is designed according to IEC60068-2-75 Ehb&comma; and can applicate to IEC60598&comma; IEC60068-2-75 and etc&period;
 
Degrees of protection against external mechanical impacts
 
IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10
0&period;14J 0&period;2J 0&period;35J 0&period;5J 0&period;7J 1J 2J 5J 10J 20J
 
Model Impact Energy
IK01 &lpar;single&rpar; 0&period;14±0&period;01J
IK02 &lpar;single&rpar; 0&period;20±0&period;02J
IK03 &lpar;single&rpar; 0&period;35±0&period;03J
IK04 &lpar;single&rpar; 0&period;50±0&period;04J
IK05 &lpar;single&rpar; 0&period;70±0&period;05J
IK06 &lpar;single&rpar; 1&period;00±0&period;05J
Ik07 &lpar;single&rpar; 2&period;00±0&period;10J
IK01-IK06 &lpar;universal&rpar; 0&period;14J~1&period;00J
 
IK07-IK10 Pendulum Impact Hammer
Introduction&colon;
This device is designed according to O-1997 and IEC62262&comma; and can meet the test requirements of IEC60598&comma; EN50102&comma; GB2423&period;55-2006&comma; GB20138-2006 and etc&period; It is apply to sheet metal for mechanical impact testing&period; The device can be adjusted back and forward&comma; left and right&comma; and the angle also can be adjusted&period;
 
Specification
Angle&colon; 0~900 adjustable
Length of swing rod&colon; 1000mm
Impact hammers&colon; 1&period;7kg&comma; 5kg&comma; 5kg&comma; 10kg steel hammers with swing rods
Impact height&colon; 200~1200mm adjustable
Impact energy&colon; 2J&comma; 5J&comma; 10J&comma; 20J
 
 
Note&colon;
The standard configuration includes 0&period;5kg&comma; 1&period;7kg and 5kg hammers for IK 07 to IK10 testing&comma; 10KG hammer for 50J test is a optional device&period;
 
Characteristics 0f Striking Elements
Energy&sol;J ≤1
 ±10&percnt;
2
±5&percnt;
5
±5&percnt;
10
±5&percnt;
20
±5&percnt;
50
±5&percnt;
Equivalent mass±2&percnt;kg 0&period;25&lpar;0&period;2&rpar; 0&period;5 1&period;7 5 5 10
Material Nylon steel
R&sol;mm 10 25 25 50 50 50
D&sol;mm 18&period;5&lpar;20&rpar; 35 60 80 100 125
f&sol;mm 6&period;2&lpar;10&rpar; 7 10 20 20 25
r&sol;mm - - 6 - 10 17
l&sol;mm Depends
 
Fall Height
Energy&sol;J 0&period;14 0&period;2 &lpar;0&period;3&rpar; 0&period;35 &lpar;0&period;4&rpar; 0&period;5 0&period;7 1 2 5 10 20 50
Equivalent mass&sol;kg 0&period;25 &lpar;0&period;2&rpar; 0&period;25 &lpar;0&period;2&rpar; 0&period;25 &lpar;0&period;2&rpar; &lpar;0&period;2&rpar; 0&period;25 0&period;25 0 &period;25 0&period;5 1&period;7 5 5 10
Fall height±1&percnt;mm 56 &lpar;100&rpar; 80 &lpar;150&rpar; 140 &lpar;200&rpar; &lpar;250&rpar; 200 280 400 400 300 200 400 500
 
Degrees of protection against external mechanical impacts
 
IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10
0&period;14J 0&period;2J 0&period;35J 0&period;5J 0&period;7J 1J 2J 5J 10J 20J