TitleProduct

G55 Photoelectric Sensor Switch

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Zhejiang

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-26 01:46

  • Browse the number:

    132

Send an inquiries
+
Yueqing Ann Electric Co., Ltd.
Contactaixin:

Mr. Andy(Mr.)  

Email:

telephone:

phone:

Arrea:

Zhejiang

Address:

No. 201-207, Liule Road, Liushi, Yueqing, Wenzhou, Zhejiang, China 325604

Website:

http://www.medtech-corp.com/com/annelectric/

+

G55 Photoelectric sensor switch
Throuht-beam type

Through-beam bype photoelectric switch is designed that via the light beam between opposite-mounted transmitter and receiver, the object passing through these two devices will interrupt the light beam and start the receiver.

 

Diffuse type
Diffuse reflection type photoelectric switch integrates the transmitter and the reciver. Light reflected by the photoelectric switch is reflected back to the receiver by the detected object.

 

Retroreflective type
Retroreflective type photoelectric switch also integrates the transmitter and the receiver, Its difference from other models is that reflecotr is used to relfect light to the photoelectric switch. Though the object between the photoelectric switch and reflector can reflect the light, it is much less efficient than the reflector so as to cut down reflected light.

 

Convergence reflection type (condensation type)
The working principle of convergence reflection type photoswitch is similar to that of direct reflection type one, while its projector and light receiver focus on boject distance, only when the object presents to the focus can the photoswitch actuate.

 Model explanation of Photoelectric Sensor

1. G: Photoelectric sensor
2. Sub code No.(18, 50, 76.....)
3. Operating voltage(2: 90-250VAC ;3: 10-30VDC; 4: 12-240VDC/24-240VAC; 5: Special voltage)
4. Detection method( A: Diffuse type; B: Mirror reflex type; C: Through beam type)
5. Detection distance (05: 5cm ; 10: 10cm; 30: 30cm; 101: 10m)
6. Output method(N: NPN transistor output; P: PNP transistor output; J: Relay output; L: AC two-line output; S: NPN+PNP)
7. Output status(A: NO; B: NC; C: NO+NC)
8. Auxi function code(T1: Front delay; T2: Rear delay; Y: Oil proof; T: With connector; I: Special requirement)

 

Technical Parameters:

Model NO. Detection distance Working voltage Output Detection way
Form State
G55 -3A 20NA 20cm DC10-30V NPN NO Diffuse type
G55 -3A 20NB 20cm DC10-30V NPN NC Diffuse type
G55 -3A 20PA 20cm DC10-30V PNP NO Diffuse type
G55 -3A 20PB 20cm DC10-30V PNP NC Diffuse type
G55-3B2NA 20cm DC10-30V NPN NO Retroreflective
G55-3B2NB 2m DC10-30V NPN NC Retroreflective
G55-3B2PA 2m DC10-30V PNP NO Retroreflective
G55-3B2PB 2m DC10-30V PNP NC Retroreflective
G55 -3C 4NA 4m DC10-30V NPN NO Through beam
G55 -3C 4NB 4m DC10-30V NPN NC Through beam
G55 -3C 4PA 4m DC10-30V PNP NO Through beam
G55 -3C 4PB 4m DC10-30V PNP NC Through beam