TitleProduct

Reflow Oven for LED 5630 Green Lamp

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2017-07-25 23:44

  • Browse the number:

    69

Send an inquiries
+
Shenzhen ETA Electronic Equipment Co., Ltd.
Contactaixin:

Mr. Henry Wong(Mr.)  

Email:

telephone:

phone:

Arrea:

Guangdong

Address:

No. 3, Road 3, Industrial Zone of Yangyong, Songgang Twon, Bao'an District, Shenzhen, Guangdong, China 518000

Website:

http://www.medtech-corp.com/com/etasmt/

+

Reflow oven for LED 5630 green lamp A800




Introduce:
1, Heating system adopts ETA patent heating technology
2, The use of imported large current solid state relay contact output, safe, reliable, equipped with a dedicated SSR radiator, heat efficiency is greatly improved, effectively prolong its useful life.
3, The heating component using high quality imported components, to ensure that the entire system with high stability and reliability, can assure long life.
4, Combined with temperature controller special PID fuzzy control function, has been monitoring the temperature and heat value, with the smallest ripple control heating device, rapid response, temperature control precision, temperature distribution inside the machine error is small, the direction of the length of the temperature distribution in accordance with IPC standard.
5, Intelligent computer +PID arithmetic precision controller, through the PID only operation, automatic control heat, fuzzy control function the fastest speed corresponding external heat change and through internal controls to ensure the temperature more balance.
6, The heating area of modular design, convenient disassembly and repair.
7, Has the temperature abnormal, fault diagnosis, a sound and light alarm function.
8, Independent small circulating wind design, upper and lower heating method, thermal compensation, high thermal efficiency, energy saving, quick heating speed, suitable for BGA and CSP components quality products welding. Forced air circulation system of special structure, make PCB components and uniform heating, high efficiency, fast heating speed.
9, , Blower system uses advanced air duct design, imported blower system is equipped with three layer wind device, wind transported uniform, high heat exchange efficiency.
10, Preheating, welding zone and a cooling zone under the independent heating cycle, independent, independent temperature control, temperature difference between adjacent temperature areas of MAX up to 100degree, not temperature, each temperature area temperature and wind speed can be adjusted independently.
11, Equipped with 3 temperature measuring socket, measurable adjusting temperature curve, continuous temperature curve test can be achieved the international standard of lead-free welding process technology.
12, Imported high temperature motor direct drive air circulation, hot well balanced, stable operation, long service life, low noise, small vibration.
13, The power matching the appropriate temperature, rapid temperature rising, from room temperature to set working temperature for about 20 minutes. And it is fast and efficient thermal compensation performance.
14, Modular design, compact structure, convenient maintenance.
15, Independent cooling zone, ensuring the PCB board plate at a desired temperature.
16, The transmission system adopts imported motor, special governor speed, stable running, speed adjustable range 0-1600mm/min.
17, The independent wheel structure and Taupin support, combined with stainless steel net belt, stable running, accurate speed up to ± 10mm/min, especially for BGA/CSP 0201 welding.
18, Special stainless steel word net belt, durable wear-resistant. Long time use is not easy deformation.
19, On the platform of Windows, convenient storage and call the temperature curve.
20, WINDOWS 2000/WINDOWS XP operating platform, powerful function, high stability, convenient and stable long-term production management, use convenient.
21, According to the needs of optional Guide + net belt transport mode.
22, Switch machine to ensure function after stopping heating, uniform cooling, effectively prevent due to uneven temp components deformation.
23, Electronic components using high quality imported components, to ensure long-term continuous stable and reliable operation of equipment.
Model A-800
General  (Mid-sized 8-Zone)
Outside Dimension(L*W*H) 4210X830X1340 mm
Standard Color Computer Grey
Weight Approx.800KG
Number Of Heating Zones Up 8/Bottom 8
Length Of Heating Zones 2800mm
Exhaust Volume 10M3/minx2 Exhausts
Standard Feature Of Control System  
Electric Supply Required 3phase,380V 50/60Hz
Power For Warm Up 15 KW
Power Consumption 5 KW
Warming Time Approx.20 minute
Temp. Setting Range Room Temp.---300 degree
Temperature Control Method Siemens PLC+Lenovo Computer 
Temperature Control Precision ± 1.0 degree
Temperature Deviation on PCB ± 1.5 degree (by MR Board Test Standard)
Heating Element Especial Heating elements For Long Life ;  
Commutated Element Aluminum Alloy Plate
Max. Temp. Gap Between Preheat & Reflow Setting 80 degree
Max. Temp. Gap Between Preheat Zones Setting   40 degree
Max. Temp. Gap Between Reflow Zones Setting 50 degree
Abnormal Alarm Abnormal Temperature (Extra-high / Extra-low Temp.)
Board Dropped Alarm Tower Light: Yellow-Warming; Green-Normal; Red-Abnormal
Features Of Conveyor System  
Rail Number 0 Lane 
Max.Width Of PCB 300mm
Components Clearance Top/ Bottom Clearance of PCB is 20mm
Conveyor Direction L→R 
Transmission Agent(Without Rail) Air-Reflow = Mesh 
Conveyor Height 900+/-20mm
Conveyor Speed Range 300~2000mm/min
Temp. Thermocouple Slot Standard
On Line Editing Standard
Cooling Method Forced-Air (Standard)